Tel: 86-020-36670207
Fax: 86-020-37319883
Cell phone:86 13242300805
Skype: feiyi.zhou
Addr.: Town Longgui,District BaiYun,City Guangzhou,China
|
Model |
HY-LED AB01 |
Beam angle |
10 /12/ 15°(Optional) |
|
Name |
LED recessed ceiling lights room |
Power type |
Meanwell power(optional) |
|
Projection distance |
5m(Dark environment) |
Rated voltage |
AC110V-240v/(Optional) |
|
Type of light source |
CREE CREE high power LED |
Light specifications |
34/12mm |
|
Embedded open hole |
6.5cm |
Installation method |
Embedded or ceiling type |
|
Luminous flux |
1000Lm/2000LM/(Optional) |
Protection level |
IP20 |
|
Weight |
0.5kg |
||
|
Light source life |
30000h |
Lamp size |
28*8*29cm |
|
Light source power |
3W/5W/10W/(Optional) |
Inner packing box |
41.5*27*20cm (5pcs) |
|
color temperature |
3200K/ 6000K/(Optional) |
Outer packing box |
62.5*37*39cm ( pcs) |
Installation of lamps and lanterns:
Open the package out after cleaning the dust, ceiling lamps, open hole, and then put on the shell behind a slingshot to pull, put into holes inside the lamp, and then let go, slingshot will naturally take fixed lamps, connected to power line, wiring must be sealed, so as to avoid leakage.
Clear adjustment pattern:
1.Pictured above will loosen the lock ring to rotate the camera lens until the pattern is clear, be careful not to touch the lens so as not to leave fingerprints, and then lock the lens ring fixed lens.
2.Adjust the direction of pattern will slide lock screw out the direction, adjusting the light tube through the installation area is the direction of pattern rotating lens barrel, and then lock the slide direction of the lock ring.
3.Careful lens and light tube installation area, in the rotation process can not be completely screwed out of the lens and the mirror, so as not to break.Lens parameter:
The lens distance and imaging length ratio is 1:0.3, which is 1 meters projected 0.31 meters, 3 meters and 0.93 meters of projection, and so on.
Suitable place:
Children's playground, water scenery, restaurant, cafe, tea shops, cinemas, private clubs, bars, conference and other places.
Installation method:Can be placed on the table or on the floor, or ceiling installation, with screws locked on the ceiling or with a tie and wire tied to the keel.
Note: in the lamp work after a period of time, such as the need to replace the light, do not open the lid directly touch the light pattern, so that should be fully burned. After cooling operation. After the installation of lamp replacement, especially waterproof case, must be waterproof silicone and screw together tighten.
Warning:
1. When using this lamp, please pay attention to the applicable
places, indoor lamps and lanterns is strictly prohibited to
install outdoor.
2. When the lighting installation must ensure good ventilation,
so as not to affect the service life of lamps.
3. Install, check or remove the lamp before, be sure to cut off
4. Please do not face the lamp out of the light, so as not to
damage the eyes.
5. Please do not exceed the rated voltage of power supply
Website Qr Code
WeChat Qr Code